RJ45 socket is a common network socket in daily life. With the rapid development of the electronic age, RJ45 socket has a large demand for electronic equipment. So do you know how RJ45 socket works, and what is the definition of socket interface. For non professional technicians, I believe you don't know much about their relevant technical knowledge, so it doesn't matter what you don't know. The following small series will explain the working principle and interface definition analysis of RJ45 socket in detail.

Working principle analysis of RJ45 socket

The working principle of Poe in RJ45 socket filter is to provide access through (LAN) network cable

The power supply required by point (wireless access point) does not need a new power supply mode of connecting power cables separately. Now many enterprises have begun to use POE in RJ45 socket filter to reduce the cost of establishing wireless area network, because using RJ45 socket Poe technology can greatly save the huge cost and complicated lines of purchasing and installing a large number of power sockets and power lines, and ensure the reliability of power supply sources.

RJ45 socket interface definition

RJ45 interface is usually used for data transmission, and the most common application is network card interface.

RJ45 is a type of various connectors (for example, RJ11 is also a type of connector. There are two different methods of sorting RJ45 head and line, one is orange white, orange, green white, blue, blue white, green, brown white and brown; the other is green white, green, orange white, blue, blue white, orange, brown white and brown; therefore, there are also two kinds of lines using RJ45 connector, namely, straight line and interleaved line.

There are two common interfaces of RJ45 socket: DTE type generally used for network card, router Ethernet interface, etc., and DCE type used for switch, etc. DTE can be called "data terminal equipment" and DCE can be called "data communication equipment". In a sense, DTE equipment is called "active communication equipment" and DCE equipment is called "passive communication equipment". When two devices of the same type use RJ45 interface to connect communication, cross line connection must be used.

On the wire sequence of RJ45 socket

UTP network cable is composed of a certain length of twisted pair and RJ45 crystal head. The twisted pair is divided into 8 wires of different colors and twisted together in 4 pairs. The function of twisted pair is to reduce the influence of electromagnetic radiation and external electromagnetic interference as much as possible.

The RJ45 crystal head is connected to the RJ45 socket of network equipment such as network card or hub. Accordingly, RJ45 plug base is also divided into three or five types of electrical characteristics. RJ45 crystal head is composed of metal sheet and plastic. There are 8 concave monks at the front end of RJ45 crystal joint required for making network cable, which is referred to as "Se" (position).

There are 8 metal contacts in the groove, referred to as "8C" (contact), so the industry has another name of "8p8c". Special attention should be paid to the RJ45 crystal head pin number. When the metal sheet faces us, the pin number from left to right is 1 ~ 8. The number is more important for network connection. If there is a wrong connection, it may damage the RJ45 socket.

RenhotecIC is specialized in developing and selling all kinds of electronic components, welcome new and old customers to come and buy, if you like us, please pay attention to our platform and website.www.renhotecic.com

*博客内容为网友个人发布，仅代表博主个人观点，如有侵权请联系工作人员删除。